Using 3D forming methods such as Fused Filament Fabrication (FFF) or Fused Deposition Modeling (FDM) or Stereolithography (SLA) or better
Have one of the following production areas: 1) In the case of the production area, the workpiece is a square shape The width must not be less than 200 mm. not less than 150 mm in length and not less than 150 mm in height; or 2) In the case of the production area of the workpiece in a circular pattern must have a diameter of not less than 16 mm and a height of not less than 24 mm.
Able to form workpieces with a resolution of not more than 0.1 millimeters per layer (Layer).
The maximum printing speed is not less than 100 mm per second.
Have an SD-Card Reader or USB connector or better
Can be used with any type of material Acrylonitrile-Butadiene-Styrene (ABS) or Polylactic Acid (PLA) or Nylon